Englishen françaisfr Deutschde русскийru españoles portuguêspt 한국의ko Türkçetr Polskipl ไทยth

Give us a call

+8617720812054
other
Products
Home /

Lithium Battery Production Machine Line

/

Cylindrical Cell Machine

/Automatic Winding Machine For Cylindrical Cell Production

Automatic Winding Machine For Cylindrical Cell Production

Wechat:17720812054

Whatsapp:+86 13174506016

Email:David@batterymaking.com


  • Item NO.:

    TMAX-KL3-20-70
  • Payment:

    L/C,T/T,Western Union, Paypal
  • Product Origin:

    China
  • Shipping Port:

    Xiamen
  • Lead Time:

    5 days
  • Certificate:

    CE ROHS Certificate
  • Product Detail

Automatic Winding Machine For Cylindrical Cell Production

 

1. Device Description

The equipment is used for the production of cylindrical lithium-ion battery cells and is one of the key equipment for battery production. The working process is roughly as follows: after the active unwinding, the positive and negative pole pieces and diaphragms made by the film making mechanism go through tension control, dust removal, process deviation correction, iron removal, diaphragm electrostatic removal, quality monitoring and other operations, and enter the winding part under the guidance of the guide wheel and pole piece guide mechanism. After the winding production is completed, the electric core is removed by the manipulator for short-circuit detection, and is sent to the collection platform by the conveyor belt after photoelectric counting. If nonconforming products are detected during the manufacturing process, they will be removed and entered into the nonconforming product collection box during the transportation process.


2. Incoming Material Requirements

2.1 Positive and Negative Plates
1) Tolerance of Wide Slitting
A: Within 0.1mm

Deviation of Coating Width Direction

Thickness: Within 3%


2) Waveform, Bending, Warping

No waveform (Refers to the defect of the end face);
Warping (After cutting, the pole piece of the cutting part curls);
Serpentine Error: The serpentine error of the length of the pole piece unit is less than 0.3mm/1m.
3) Red or green and other obvious color tapes shall be used for tape connection to facilitate
detection, and a single roll shall be discharged at the winding place.
4) Final Marking: The signal used up as the material of the original reel and the uncoated part

of the terminal are more than 1m.


2.2 Isolating Membrane
1) Slitting Width Tolerance: ± 0.05mm
2) Visual judgment of waveform, bending and skirt shape is excluded.

3) Final Marking: The final mark can be marked in green or black for the signal of exhaustion


3. Technical Specifications and Functions

3.1 Applicable Material Specifications

Width range of electrode piece (excluding tab)

9-80mm

Exposed length of tab

8-25mm

Length of electrode piece unit

150- 1500mm

Electrode piece unwinding diameter

φ400mm

Needle diameter

1.8-6mm(Equipped with 3mm diameter needle for the first time)

Unwinding diameter of separator

φ300mm

Separator width range

10-75mm

Winding diameter

φ6mm-φ20mm

Inner diameter of unwinding core

φ76.2mm

Termination tape

Winding the battery for half a cycle to a cycle and a half

Termination tape width

20-60mm

Inner diameter of winding core of terminating tape

76.2mm

4. Technical Parameters of Equipment

Electrode Piece Cutting BurrTransverse cutting burr is less than 30 μ mLongitudinal cutting burr is less than 15 μ m. 

Cell Alignment  Positive / negative plate: ≤± 0.5 

Negative plate / diaphragm: ≤± 0.5

Diameter ofjelly roll: ≤± 0.20mm

Pass rate: ≥ 99.0%    

The ratio of the number of good products to the total number of production (Eliminate the defects caused by non equipment reasons)

Operation Rate: ≥ 95%    Ratio of actual production quantity to theoretical production quantity (Excluding downtime caused by non equipment reasons).

Productivity:  (φ 10) 5- 12ppm /250mm long electrode piece

Working tension of positive and negative plates: 20N adjustable (Can be set manually and directly on the touch screen)

Diaphragm working tension: 18N adjustable (It can be set manually and directly on the touch screen)  


 5. Equipment installation and commissioning instructions

Air supply pressure: 0.5mpa   Air demand flow: 100L/min

Power supplyThree-phase 380V 50Hz

Power10kw

Weight: 2000kg

Ambient temperature: -40 ° ~+45 °

Relative humidity≥ 60%

Overall dimensionL2800mm * H1700mm * W1350mm

Coating colorAccording to customer requirements


  

   

204.jpg

203.jpg

Related Products
Hot Rolling Press Machine
Automatic Hot Rolling Press Machine for Li Ion Battery Production

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Battery Coating Machine
Large Versatile Roll To Roll Pilot Coating Machine with Various Coating Heads

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Cylindrical Cell Machine
3 Rollers Battery Electrode Continuous and Interval Coating Machine For Pilot Production Line

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Cylindrical Hydraulic Sealing Machine
18650 26650 32650 21700 Cylindrical Battery Automatic Hydraulic Sealing Machine

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Cylindrical Cell Grooving Machine
Vertical Automatic 18650 26650 32650 Grooving Machine For Cylindrical Battery Assembly

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Cylindrical Cell Heat Shrinking Machine
Cylindrical Cell AA AAA 18650 Heat Shrinking Wrapping Machine

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Environmental Constant Temperature Humidity Chamber
80L-1000L Environmental Constant Temperature Humidity Chamber with Optional Temperature Range

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

NMP Treat System
Lithium Ion Battery Making Machine NMP Treat System Solvent Processing System Waste Gas Treatment Equipment

Wechat:17720812054 Whatsapp:+86 13174506016 Email:David@batterymaking.com

Home

Products

about

contact